Stephan I. Böttcher
a0f7135898
Merge branch 'master' into step_v7_dev
2021-09-20 14:50:13 +02:00
Stephan I. Böttcher
04f78cce62
step patch v7.3 fix calibration for acq_time=6
...
Set the acq_time=6 (as in v7).
Fix large pixel calib for T=-36°C. The fix is based on IFTP data from
July 4 to July 20 with acq_time=6 and acq_time=1.
For each IX a rought estimate was obtained for the shift of the pedestal
and the 160keV pulser peaks. The shift was applied to all large pixels.
2021-07-22 12:34:27 +02:00
Stephan I. Böttcher
2521acd8a8
step_temp_calib: fix warnings
2021-07-10 23:54:18 +02:00
Jan Christoph Terasa
0565a37a11
Fix comments in step_config.l3.
2021-07-09 12:10:21 +00:00
Jan Christoph Terasa
88bf9058c9
Change STEP PHA buffering strategy: Buffer number is the (logical) pixel number.
2020-04-20 11:52:23 +02:00
Jan Christoph Terasa
00fc4df34b
solo/step/l3: New calibrations based on bootstrap analysis.
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@7544 bc5caf13-1734-44f8-af43-603852e9ee25
2019-05-27 13:40:11 +00:00
Sebastian Boden
e25ab9c28a
solo/l3: updated *.gold files
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@7144 bc5caf13-1734-44f8-af43-603852e9ee25
2018-12-03 11:56:20 +00:00
Jan Christoph Terasa
4f326aa618
step_fs_temp_calib.l3: Updated temp calib based on bootstrap data. Only slight alterations.
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@7077 bc5caf13-1734-44f8-af43-603852e9ee25
2018-11-05 14:07:14 +00:00
Jan Christoph Terasa
1d086a0235
python/solo/step/l3/step_calib_multi.l3: L3 trigger which calibrates all hit pixels. (WIP)
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@6996 bc5caf13-1734-44f8-af43-603852e9ee25
2018-10-02 22:14:01 +00:00
Jan Christoph Terasa
8138973294
temp_calib.py: Script to read l3 temp_calib back to numpy arrays.
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@6945 bc5caf13-1734-44f8-af43-603852e9ee25
2018-08-15 14:17:37 +00:00
Jan Christoph Terasa
9aa68fdf58
step_temp_calib.l3: Set correct default temperature.
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@6845 bc5caf13-1734-44f8-af43-603852e9ee25
2018-05-24 13:32:18 +00:00
Sebastian Boden
8e81b26395
... done
...
git-svn-id: svn+ssh://asterix/home/subversion/stephan/solo/eda/python@6675 bc5caf13-1734-44f8-af43-603852e9ee25
2018-03-08 10:05:06 +00:00
