Fire a test pulse to each channel at the beginning of each PHA_cadence.
The test_regs are reset every second with the usual ix config.
Each large or small pixel gets enabled in both test_regs
once during the first 16 seconds of the PHA cadence.
For the first 30 seconds of the PHA_cadence both test pulsers are fired
once per second @5000µs.
ppss_modulus learns to fire on consecutive ranges of seconds. length
must be a valid cadence, phase must be aligned to length.
New step_pixels.pixels() enumerates physical STEP pixels.
PHA_candence is set to 600s.
.do_pulser() default is enabled.
TODO? To fire 16 times instead of 30, three entries are required for
each ix:
ppss_modules(PHA_cadence, 0, 10)
ppss_modules(PHA_cadence, 10, 5)
ppss_modules(PHA_cadence, 15)
All this is untested.
The new parameter page is is the base address of the config in EEPROM.
The ID text goes to EEPROM_base + page + 0x40.
The index table goes to EEPOM_base + page + 0x80.
The data goes to EEPOM_base + page + 0x100.
The default is page=0, reproducing the old bahaviour.
hetept/config.py:
Increment version to v0009. Add a function for generating PHA cadence patches.
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8152 bc5caf13-1734-44f8-af43-603852e9ee25
Increasing ept_2dhist_cutoff from 125keV to 1MeV.
The EPT PHA buffer for penetrating particles is mainly filled with MIPs.
Increasing the cutoff to 1MeV should filter most MIPs and increase the number
of PHA words from non-relativistic particles.
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8151 bc5caf13-1734-44f8-af43-603852e9ee25
New data products for EPT stopping particles:
Introducing NO_EPT_mag and NO_EPT_foil, two data products with fully symmetrical binning for INT and MAG with 77 energy channels covering the full range of the l3histogram above 25 keV at 1s/5s cadence in CLOSE/FAR mode.
Introducing B1_EPT_mag, a burst mode data product that can be used together with NO_EPT_mag to double the energy resolution up to 1.6MeV.
All other EPT data products for stopping particles have been removed.
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8150 bc5caf13-1734-44f8-af43-603852e9ee25
PHA data for 2D EPT events is spammed by relativistic protons.
This change adds an itot limit for inclusion into the EPD-2D PHA buffer.
An extra instruction is required to implement this limit. An upload of
the complete L3 trigger is required for deployment.
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8112 bc5caf13-1734-44f8-af43-603852e9ee25
hetept/config.py: Increment version to v8. In v8 the HK_ANA candence is changed back from 600s to 60s. HET ABnC stopping proton PHA buffer reverted to status of r8033.
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8061 bc5caf13-1734-44f8-af43-603852e9ee25
hetept/config.py: increment version to v0007
git-svn-id: svn+ssh://asterix.ieap.uni-kiel.de/home/subversion/stephan/solo/eda/python@8044 bc5caf13-1734-44f8-af43-603852e9ee25
