Revert "Look for ~/.config/avrdude/avrduce.rc configuration file (#1131)"

This reverts commit 34fa2faba5.

src/avrdude.1

@@ -1320,10 +1320,10 @@ the CS line being managed outside the application.
 .Sh FILES
 .Bl -tag -offset indent -width /dev/ppi0XXX
 .It Pa /dev/ppi0
-Default device to be used for communication with the programming
+default device to be used for communication with the programming
 hardware
 .It Pa avrdude.conf
-Programmer and parts configuration file
+programmer and parts configuration file
 .Pp
 On Windows systems, this file is looked up in the same directory as the
 executable file.
@@ -1332,22 +1332,14 @@ On all other systems, the file is first looked up in
 relative to the path of the executable, then in the same directory as
 the executable itself, and finally in the system default location
 .Pa ${PREFIX}/etc/avrdude.conf .
-.It Pa ${XDG_CONFIG_HOME}/avrdude/avrdude.rc
-Local programmer and parts configuration file (per-user overrides); it follows the same syntax as
-.Pa avrdude.conf ;
-if the
-.Pa ${XDG_CONFIG_HOME}
-environment variable is not set or empty, the directory
-.Pa ${HOME}/.config/
-is used instead.
 .It Pa ${HOME}/.avrduderc
-Alternative location of the per-user configuration file if above file does not exist
+programmer and parts configuration file (per-user overrides)
 .It Pa ~/.inputrc
 Initialization file for the
 .Xr readline 3
 library
-.It Pa <prefix>/doc/avrdude/avrdude.pdf
-User manual
+.It Pa ${PREFIX}/share/doc/avrdude/avrdude.pdf
+Schematic of programming hardware
 .El
 .\" .Sh EXAMPLES
 .Sh DIAGNOSTICS

src/avrdude.conf.in

@@ -389,7 +389,7 @@
 # ATmega169     0x78
 
 #
-# Overall avrdude defaults; suitable for ~/.config/avrdude/config
+# Overall avrdude defaults; suitable for ~/.avrduderc
 #
 default_parallel   = "@DEFAULT_PAR_PORT@";
 default_serial     = "@DEFAULT_SER_PORT@";

src/avrdude.h

@@ -26,7 +26,6 @@
 #define USER_CONF_FILE "avrdude.rc"
 #else
 #define USER_CONF_FILE ".avrduderc"
-#define XDG_USER_CONF_FILE "avrdude/avrdude.rc"
 #endif
 
 extern char *progname;       // name of program, for messages

src/doc/avrdude.texi

@@ -1715,23 +1715,20 @@ the parts and programmers that it knows about.  The advantage of this is
 that if you have a chip that is not currently supported by AVRDUDE, you
 can add it to the configuration file without waiting for a new release
 of AVRDUDE.  Likewise, if you have a parallel port programmer that is
-not supported, chances are that you can copy an
-existing programmer definition and, with only a few changes, make your
-programmer work.
+not supported by AVRDUDE, chances are good that you can copy and
+existing programmer definition, and with only a few changes, make your
+programmer work with AVRDUDE.
 
 AVRDUDE first looks for a system wide configuration file in a platform
 dependent location.  On Unix, this is usually
-@code{/usr/local/etc/avrdude.conf}, whilst on Windows it is usually in the
-same location as the executable file.  The full name of this file can be
-specified using the @option{-C} command line option.  After parsing the system wide
-configuration file, AVRDUDE looks for a per-user configuration
+@code{/usr/local/etc/avrdude.conf}, while on Windows it is usually in the
+same location as the executable file.  The name of this file can be
+changed using the @option{-C} command line option.  After the system wide
+configuration file is parsed, AVRDUDE looks for a per-user configuration
 file to augment or override the system wide defaults.  On Unix, the
-per-user file is @code{$@{XDG_CONFIG_HOME@}/avrdude/avrdude.rc}, whereas
-if @code{$@{XDG_CONFIG_HOME@}} is either not set or empty,
-@code{$@{HOME@}/.config/} is used instead. If that does not exists
-@code{.avrduderc} within the user's home directory is used. On Windows,
-this file is the @code{avrdude.rc} file located in the same directory as
-the executable.
+per-user file is @code{.avrduderc} within the user's home directory.  On
+Windows, this file is the @code{avrdude.rc} file located in the same
+directory as the executable.
 
 @menu
 * AVRDUDE Defaults::            

src/main.c

@@ -425,32 +425,6 @@ static void exit_part_not_found(const char *partdesc) {
 }
 
 
-#if !defined(WIN32)
-// Safely concatenate dir/file into dst that has size n
-static char *concatpath(char *dst, char *dir, char *file, size_t n) {
-  // Dir or file empty?
-  if(!dir || !*dir || !file || !*file)
-    return NULL;
-
-  size_t len = strlen(dir);
-
-  // Insufficient space?
-  if(len + (dir[len-1] != '/') + strlen(file) > n-1)
-    return NULL;
-
-  if(dst != dir)
-    strcpy(dst, dir);
-
-  if(dst[len-1] != '/')
-    strcat(dst, "/");
-
-  strcat(dst, file);
-
-  return dst;
-}
-#endif
-
-
 /*
  * main routine
  */
@@ -491,6 +465,10 @@ int main(int argc, char * argv [])
   char  * logfile;     /* Use logfile rather than stderr for diagnostics */
   enum updateflags uflags = UF_AUTO_ERASE | UF_VERIFY; /* Flags for do_op() */
 
+#if !defined(WIN32)
+  char  * homedir;
+#endif
+
 #ifdef _MSC_VER
   _set_printf_count_output(1);
 #endif
@@ -878,10 +856,14 @@ int main(int argc, char * argv [])
   win_usr_config_set(usr_config);
 #else
   usr_config[0] = 0;
-  if(!concatpath(usr_config, getenv("XDG_CONFIG_HOME"), XDG_USER_CONF_FILE, sizeof usr_config))
-    concatpath(usr_config, getenv("HOME"), ".config/" XDG_USER_CONF_FILE, sizeof usr_config);
-  if(stat(usr_config, &sb) < 0 || (sb.st_mode & S_IFREG) == 0)
-    concatpath(usr_config, getenv("HOME"), USER_CONF_FILE, sizeof usr_config);
+  homedir = getenv("HOME");
+  if (homedir != NULL) {
+    strcpy(usr_config, homedir);
+    i = strlen(usr_config);
+    if (i && (usr_config[i - 1] != '/'))
+      strcat(usr_config, "/");
+    strcat(usr_config, USER_CONF_FILE);
+  }
 #endif
 
   if (quell_progress == 0)