Stephan/solo_altera
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Commit graph

  • 2455607f15 iarena: unified, larger la and scope stephan 2021-03-22 15:36:20 +00:00
  • 52dbb72b5e idef-x+parser: dont drop junk after sparse events stephan 2021-03-22 15:31:28 +00:00
  • 286a5334ac iarena: add real adata bits to adc_monitor stephan 2021-03-21 20:10:34 +00:00
  • ee3e0acda1 iarena: add monitor taps to adc_data, add some Adata bits to la stephan 2021-03-21 19:48:48 +00:00
  • 0af7668b9b lasc: sim diagnostic waveforms stephan 2021-03-21 17:02:23 +00:00
  • c6090aaaf5 iarena lasc: use a previous fifo16 implementation stephan 2021-03-20 11:03:57 +00:00
  • 8731656139 iarena: use lasc for analyser and oscilloscope stephan 2021-03-19 21:56:07 +00:00
  • c6e7655108 LASC: unified logic analyser ans oscilloscope stephan 2021-03-19 21:55:39 +00:00
  • 4235275876 iarena: quartus 13 stephan 2021-03-18 20:29:43 +00:00
  • 06362e4f96 u-idef-x: python3, new ifc, fixes stephan 2021-03-18 20:08:25 +00:00
  • e67c771589 arena.py: Icc shunt 1Ω instead of 0.1Ω (iarena) stephan 2021-03-18 20:07:21 +00:00
  • f7ac58a1d8 arm: FATSIZE_flash_iarena=1M stephan 2021-03-18 09:30:05 +00:00
  • 49c2d269a8 MUSTANG: avoid division by zero stephan 2021-03-18 09:29:42 +00:00
  • 2b64209f09 idef-x-termination stephan 2021-03-15 15:08:08 +00:00
  • f661c140d7 irena.c: uart reset defaults to MTR3GSE levels. stephan 2021-03-13 00:31:22 +00:00
  • c81e5b32eb irena.c: fix sc->zeros stephan 2021-03-12 21:02:51 +00:00
  • 855371b299 nm64: thr_scan as used on jfj/igy nm64 2021-03-12 21:01:03 +00:00
  • 8ddef25aa1 JFJ_IGY-650mbar-10min: fix pressure ref stephan 2021-03-12 20:40:57 +00:00
  • e47d082a81 cospi: analysis work, epoch stephan 2021-03-12 20:38:26 +00:00
  • 6643f74d9c cospi: make bom stephan 2021-03-12 20:36:12 +00:00
  • a30dd3d484 cospi: fix values stephan 2021-03-12 20:35:39 +00:00
  • f077b71bc9 dorn: lost+found stephan 2021-03-12 20:33:00 +00:00
  • 913d0f7efa SCI_ITF: add flg to tag stephan 2021-03-12 20:30:18 +00:00
  • 99c19034e9 step sim: flight nominal ix settings stephan 2021-03-12 20:21:07 +00:00
  • edc77ea32e uartterm, irena: --md3 stephan 2021-03-12 20:15:57 +00:00
  • 031e99583f arena: pyhton3 fix stephan 2021-03-12 20:13:07 +00:00
  • f6fc90265a usbterm: Python3 fix stephan 2021-03-12 20:11:36 +00:00
  • 9a7d64d749 IRENA: Vbias offset for MD3 stephan 2021-03-12 20:09:52 +00:00
  • 26181d30cc mustang THRSCAN.awk stephan 2021-03-12 20:09:01 +00:00
  • 104c9ece2e RAW_ITF: small fix to Temp calib stephan 2021-03-12 20:05:47 +00:00
  • 93fa42e159 sologse/mtr3gse: Makefile cleanup, Model specific sources stephan 2021-03-10 20:49:48 +00:00
  • 6838b542aa nmmustang: thr_scan(do_defaults, hv, thr), hv_scan() mustang 2021-03-10 13:01:36 +00:00
  • e14b47406b sololo,cron stephan 2021-03-09 21:51:57 +00:00
  • b09f9bdeed step.gold: found to simulate so, with a small fix to por stephan 2021-03-09 17:02:50 +00:00
  • b9b8ccfb51 nmmustang: thr_scan(), DAC infra work mustang 2021-03-08 12:14:36 +00:00
  • 820c74f51e usbterm: dump.Sync mustang 2021-03-07 10:36:06 +00:00
  • e25219e00e class uartterm.md3_gse() stephan 2021-03-05 12:08:02 +00:00
  • f558cf5700 uartterm: fix for MD3, Reset - EINT1 swap and polarity stephan 2021-03-04 20:22:29 +00:00
  • 68c1717142 irena.py: python3 stephan 2021-03-04 20:19:26 +00:00
  • cc9752d0e0 Roberts scripts M_Coinc added stephan 2021-03-03 14:11:28 +00:00
  • 2a44761488 python3 porting of solo/ce4 stephan 2021-02-25 10:38:33 +00:00
  • c27c26513a solomsgclass: new class msg_uart_hex stephan 2021-02-25 10:37:24 +00:00
  • e3e7f9544e CE4.awk: replace numeric column by named constant in Ibias() stephan 2021-02-23 21:49:01 +00:00
  • 4261d74e68 nm64 IGY rate plot stephan 2021-02-15 09:10:14 +00:00
  • 9a9ae2782f solol0: new L0 data pipeline, initil commit stephan 2021-01-27 13:54:03 +00:00
  • c78a8cc8e8 all_raw_itf: preformance work stephan 2021-01-27 13:52:33 +00:00
  • 98d5947771 itf_parser: -V defs_version -O defs_version_{file|scratch} stephan 2021-01-06 22:01:38 +00:00
  • 23265ecf77 itf_parser: fix ugly SCI CONT stephan 2021-01-05 00:46:56 +00:00
  • 337969c981 itf_parser: -E ccsds stephan 2021-01-05 00:30:41 +00:00
  • 7257d7377c itf_parser: terminate UNIT ID with eol stephan 2020-12-30 21:00:09 +00:00
  • 5b6f4707e9 solohk: t2 ref is all_raw.tags stephan 2020-12-30 20:58:52 +00:00
  • 843dac4a85 RAW_ITF: fix Vbias, step Ibias stephan 2020-12-30 20:57:57 +00:00
  • 2e46368f7d solo/configurations/: kollhoff 2020-12-20 13:21:22 +00:00
  • e16591e31d hetept/config.py: kollhoff 2020-12-20 13:09:12 +00:00
  • ae08521241 hetept/l3/ept_calib.l3: kollhoff 2020-12-20 12:41:11 +00:00
  • a983b1473c hetept/data.py kollhoff 2020-12-18 11:32:21 +00:00
  • 5cb24f921c raw_itf: DRIBBLE stephan 2020-12-14 10:52:28 +00:00
  • 1db5d179dc nm64 jfj/igy: thr/offset=-2000 nm64 2020-12-05 20:59:17 +00:00
  • 61400ce703 heteptdig datasheet: change of encoding low count rates stephan 2020-12-03 20:53:06 +00:00
  • 21a35b4d73 backend: fix quartus warnings about port size mismatch stephan 2020-11-30 19:44:12 +00:00
  • faf1b13f5a hk.awk: add Vprim, awk parsable stephan 2020-11-25 13:19:49 +00:00
  • a0d4a93bb1 step timestamp analysis stephan 2020-11-13 16:25:53 +00:00
  • 56a0668556 nm64 script to plot jfj-igy data stephan 2020-10-29 11:22:40 +00:00
  • b47686d7c2 nmmustang: ipython3, fix _connect() stephan 2020-10-24 16:35:08 +00:00
  • 2c2da89f37 armlib.sh: automatic python selection stephan 2020-10-20 22:32:19 +00:00
  • 6425fcb9ff armlib: Python 3 compatibility including …term drivers, fixes fat, rbf stephan 2020-10-20 22:09:02 +00:00
  • d976fb5670 armlib: Python 3 compatibility including …term drivers, fixes stephan 2020-10-20 21:32:48 +00:00
  • f7a0b41f58 armlib: Python 3 compatibility including …term drivers stephan 2020-10-20 21:14:29 +00:00
  • abd7cca480 NM64: OLF(), count_E(), do_HIST(), -irena stephan 2020-10-18 13:00:04 +00:00
  • 7ee55a8acb nm-hour-rate: --igy stephan 2020-10-18 12:58:47 +00:00
  • 3d75af66a1 nm64: do not rsync from nm64data stephan 2020-10-18 12:58:05 +00:00
  • 3ff9894595 nm64 bern limit gchannels to 12 primary channels nm64 2020-10-18 12:55:30 +00:00
  • 79c153fca8 nm64: script to compute gauss averages of NM count rates stephan 2020-10-15 09:59:57 +00:00
  • 710ff7109a nm64: log stephan 2020-10-15 09:58:59 +00:00
  • b47d7394e2 nm64/rsync-cron: add etbern4->jfj/igy, change etbern3->bern stephan 2020-10-14 13:27:03 +00:00
  • 755a2787e9 nmrena FPGA rbf stephan 2020-10-14 11:49:39 +00:00
  • bebfcbd6f7 nmrena: add nm64/genable, nm64/enable selects event output stephan 2020-10-13 20:14:56 +00:00
  • e1dea41ba4 nm64: commissioning JFJ/IGY SN5, ofset -5000, no data subdirs nm64 2020-10-09 09:19:32 +00:00
  • 7a1d56fa09 nm64: commissioning JFJ/IGY SN5, ofset -5000, no data subdirs nm64 2020-10-09 09:17:57 +00:00
  • 4f17f0f079 nm64-auto: independence from unit and host nm64 2020-10-07 11:25:01 +00:00
  • bfd2dfb113 nm64: SN6 stephan 2020-09-30 19:49:11 +00:00
  • fabc7fdb18 nm64: verbosity when Reset_Arm() nm64 2020-09-30 19:08:44 +00:00
  • 5a73dca3db nm64: --auto-run=interactive, remove --capture nm64 2020-09-28 12:13:07 +00:00
  • 4bef097c83 nm64.py --auto-run via inittab nm64 2020-09-25 22:39:44 +00:00
  • af8fec2fb0 nm64: SN5 scan values nm64 2020-09-25 12:51:13 +00:00
  • aded91d72a nm64 --auto-run script, called from inittab nm64 2020-09-25 12:50:53 +00:00
  • 7624d0b717 itf_parser: STEP IX REGS fix mask. This is a change of the output format. stephan 2020-09-22 16:07:43 +00:00
  • 1641031963 ept.l3: revert -c 8112 stephan 2020-09-16 14:36:39 +00:00
  • 8b22537d8a l3sim: remove misguided print() to stdout stephan 2020-09-15 06:33:56 +00:00
  • 975732a9bd ept.l3: PHA data for 2D EPT events is spammed by relativistic protons. This change adds an itot limit for inclusion into the EPD-2D PHA buffer. An extra instruction is required to implement this limit. An upload of the complete L3 trigger is required for deployment. stephan 2020-09-15 06:27:49 +00:00
  • 7f66c218a1 nm64: restore raising an exception on resp() timeout in Reboot() nm64 2020-09-13 19:20:05 +00:00
  • 5398139e71 pressure.py: do_message, uniform timestamps stephan 2020-09-06 19:37:35 +00:00
  • 42782e0aac pressure.py: restore functionality stephan 2020-09-05 19:39:28 +00:00
  • b7a27aaff0 fix conf_fans() stephan 2020-09-05 19:39:02 +00:00
  • 1b8fe3c0e8 pressure.py: fix options stephan 2020-09-05 19:04:57 +00:00
  • 23f971a311 pressure.py: disable incomplete args parser stephan 2020-09-05 18:54:54 +00:00
  • 16276c06a2 NM64.py: fix isADC() to pick the voltage, not the noise stephan 2020-09-04 22:04:11 +00:00
  • 61600193bd nm64/makefile: support .xz compressed files stephan 2020-09-04 20:28:10 +00:00
  • 3d6de83956 NM64.awk: fix isADC() to pick the voltage, not the noise stephan 2020-09-04 19:11:38 +00:00
  • 96e0c1b0ba nm64: SN5.RC stephan 2020-09-04 16:17:11 +00:00