Commit graph

  • 4dfe410633 meps_ana_demo_nf: HK ADCs stephan 2019-10-26 20:28:54 +00:00
  • 728cd6e4a1 meps_ana_demo: reapply _nf ADCs to current flight layout stephan 2019-10-26 16:19:22 +00:00
  • 0c4e15c7d2 sfilter: yet another change to the L2 trigger. Lately we got a 4th window parameter. The logic was that only one channel contributing to a coincidence trigger on either level must be in a narrow age window. There were still races of all kinds. This change is conceptually simple and should eliminate all races. stephan 2019-10-26 16:17:20 +00:00
  • 6256281ce4 hetept/data.py: shift value must be integer. terasa 2019-10-24 09:36:47 +00:00
  • d73a3c9bb1 configtable.py: Python3 compat for hex() terasa 2019-10-24 09:10:17 +00:00
  • 8c4e60aea7 hetept/data.py: Fix indentation, tab -> 4 spaces terasa 2019-10-24 08:55:46 +00:00
  • d2c7de5f47 solo_data.py: Fix indentation: tab -> 4 spaces. terasa 2019-10-24 08:50:19 +00:00
  • 464b688211 meps_ana_demo: p&r those 48 resistors stephan 2019-10-23 20:36:49 +00:00
  • 63a5f4fc4d meps_ana_demo: add series resistors to DOUT, TODO: layput stephan 2019-10-23 13:38:27 +00:00
  • 291504d588 meps_ana_demo: netlist stephan 2019-10-23 13:11:46 +00:00
  • 2771c288d7 meps_ana_demo: minor plane fixes, layer numbers, review by Björn stephan 2019-10-23 12:59:07 +00:00
  • a51506bdc6 meps_ana_demo: checkout stephan 2019-10-23 12:55:32 +00:00
  • e57dc3e742 l1l2: .l2_simulate() stephan 2019-10-22 21:28:56 +00:00
  • 0b049a4d63 sfilter dranbufmux: simplify formula for next stephan 2019-10-22 19:27:08 +00:00
  • 85f3e9fedb meps_ana_demo: fix a single metric 16mil Via stephan 2019-10-22 11:57:36 +00:00
  • b109c82d31 meps_ana_demo: fix inner layers in round corners stephan 2019-10-22 10:46:22 +00:00
  • a495b63b21 meps_ana_demo: move HK from stiffener, clear and mark the stiffener contact area stephan 2019-10-22 09:13:24 +00:00
  • 969610788b meps_ana_demo_nf: all ADCs in TSSOP stephan 2019-10-21 23:45:52 +00:00
  • 435ef9c6f1 meps_ana_demo: make programming connector Altera compliant stephan 2019-10-21 18:52:06 +00:00
  • d0bf4d7f6d meps_ana_demo: DRC 6min/6mil clean, 6mil/8mil almost clean stephan 2019-10-21 16:03:57 +00:00
  • 4b5ecfbe4e meps_ana_demo: add series resistor in AS_DATA add logos place name and version texts stephan 2019-10-21 09:49:27 +00:00
  • a67ba56f47 EPCS16 symbol, late commit stephan 2019-10-21 09:22:59 +00:00
  • 571299dc5c meps_ana: altera physical design constraints verified stephan 2019-10-20 22:55:57 +00:00
  • b6e3cb6d61 meps_ana: move FPGA design stephan 2019-10-20 21:10:45 +00:00
  • 2459923bf6 meps_ana_demo: continue the move, new home for verilog stephan 2019-10-20 21:08:42 +00:00
  • c64b8945d6 meps_ana_demo: move into the new home stephan 2019-10-20 21:04:08 +00:00
  • 1967533ae3 meps_ana_demo: target for new home stephan 2019-10-20 21:02:51 +00:00
  • 78d086a785 meps_ana_demo: partname of the Altera config flash stephan 2019-10-20 21:01:09 +00:00
  • d3c586a412 meps_ana_demo: layout complete fligt + Altera stephan 2019-10-20 04:47:13 +00:00
  • f5fe66e4f0 meps_ana_demo: progess, hk stephan 2019-10-18 22:10:49 +00:00
  • 2fd2e73fb7 meps_ana_demo: MSEL1 needs to be driver by Vpll, use 0603 jumpers stephan 2019-10-18 15:52:50 +00:00
  • 6107e885e4 meps_ana_demo: layout progess stephan 2019-10-18 15:43:27 +00:00
  • 72ae061ff3 meps_ana_demo: layout feasibility established stephan 2019-10-18 09:18:25 +00:00
  • afcdf98bbf meps_ana_demo: cut&paste from heteptana-actel stephan 2019-10-17 23:06:26 +00:00
  • 607882be20 meps_ana_demp, meps_ana_bias schematics stephan 2019-10-17 16:25:01 +00:00
  • 84d75c8809 meps_ana: successfull simulation stephan 2019-10-16 22:30:40 +00:00
  • 5c9f1b5ee5 meps_ana: board size sketch stephan 2019-10-16 17:37:34 +00:00
  • 1250289f23 meps_ana_test: syntax error free stephan 2019-10-16 17:36:02 +00:00
  • 2234363ea2 heteptana: gold stephan 2019-10-16 15:58:07 +00:00
  • 3c9db94781 configtable.py: index_table ctor magic parameter uses None as default terasa 2019-10-16 15:27:09 +00:00
  • 3d978b185d l1l2: classes .l1l2.meps_ana .l1l2.meps_simulation stephan 2019-10-16 13:56:11 +00:00
  • 3ebc652011 solo/python: revert misguided rename of class heteptana stephan 2019-10-16 12:32:57 +00:00
  • bf570b2a42 heteps/l3sim: lost+found, untested stephan 2019-10-16 12:32:15 +00:00
  • 2bff1ffb71 C'E4 L3: fix PHA select for LET BI stephan 2019-10-16 12:31:38 +00:00
  • f2133a45c3 flyrena: enhancements for meps_ana stephan 2019-10-15 23:44:56 +00:00
  • 201bf00c1d meps_ana: adapted from heteptana stephan 2019-10-15 23:34:42 +00:00
  • 604c31e358 heteptana: revive test stephan 2019-10-15 21:28:40 +00:00
  • acb3d04734 irena_core: add peek test stephan 2019-10-15 21:27:23 +00:00
  • ad8af72290 erena gtkw stephan 2019-10-15 18:54:07 +00:00
  • 81babb6558 flash_erena: new bitfiles stephan 2019-10-15 18:53:24 +00:00
  • bc38ec52c9 HERTZ.awk: fix sign of I_rfa, one more digit stephan 2019-10-15 18:53:02 +00:00
  • 01776f04f7 nmhertz: fix sign of I_rfa stephan 2019-10-15 18:52:13 +00:00
  • dc63369ad8 hour_rate_pressure: smaller xtics stephan 2019-10-15 18:26:10 +00:00
  • 40d4c83b8f comment typo stephan 2019-10-15 18:25:20 +00:00
  • 7956890526 flyrena sfilter: sampleram with EDAC stephan 2019-10-15 18:24:34 +00:00
  • d05fb76594 hamming: s64_edac for MEPS sampleram stephan 2019-10-15 15:00:00 +00:00
  • 9aeb555f2c nm64_pmthv: add Vset divider, add NTC coax pad stephan 2019-10-15 12:37:59 +00:00
  • 7b4c0b7c31 nm64_pmthv: layout complete, DRC, names, soldermask stephan 2019-10-14 22:59:15 +00:00
  • c17216f24f nm64_pmthv: HV brick footprints stephan 2019-10-14 16:46:06 +00:00
  • f0d90530ec hetept_config: corrected AB ion histogram information(comment) elftmann 2019-10-14 11:36:26 +00:00
  • 15c4b77db6 xrena fpga address map stephan 2019-10-11 22:52:28 +00:00
  • 3d903217ba arm: pressure/read defaulta to fifo 1 stephan 2019-10-10 19:58:35 +00:00
  • 8a2d525c24 erena: add pressure sensor stephan 2019-10-10 14:50:54 +00:00
  • f2be8560d6 erena: gtkwave save file stephan 2019-10-10 13:35:50 +00:00
  • 6ddcf7269c armlib.ifc.Areg(slow) stephan 2019-10-09 14:58:21 +00:00
  • 1fcb6d9a12 nmrena.read_adcs(acqtime) stephan 2019-10-09 14:57:44 +00:00
  • 3767e4dca4 flash_erena: sc scripte stephan 2019-10-09 14:55:11 +00:00
  • 6e5eab2614 erena.py: support sc aio, support mclk=40MHz stephan 2019-10-08 21:38:04 +00:00
  • a232e70b9f erenasc: real pinout, gold stephan 2019-10-08 20:40:40 +00:00
  • 04eb1884b2 uirena: generic µirena script stephan 2019-10-08 20:38:51 +00:00
  • a5c9dc9056 erenasc: fixed bitfile stephan 2019-10-08 20:37:54 +00:00
  • db259839bd erena/filter new syntax stephan 2019-10-08 20:33:33 +00:00
  • 5a5a48648a nm64_power: add 220µF to V4, to avoid ARM reset at /altera/reset stephan 2019-10-08 14:28:41 +00:00
  • 150f25f3c2 nmrena: bitfiles stephan 2019-10-08 14:26:57 +00:00
  • 34223b5a86 erena_test: erenasc stephan 2019-10-07 21:42:32 +00:00
  • 89a29479ef ads8688: instance name typo, CLKDIV pass through stephan 2019-10-07 21:42:03 +00:00
  • 4e1ea07c51 erenasc: fix utick stephan 2019-10-07 18:36:08 +00:00
  • b9a3c488a9 Exclude burst from total data rate estimation. terasa 2019-10-07 16:10:22 +00:00
  • 1975db0796 flash_erena/ESC40104.RBF: bitfile 40MHz, single channel, 4-stage epipe stephan 2019-10-07 14:03:18 +00:00
  • 65e0d960f8 nm64_prim: TRACO pin hole fixes stephan 2019-10-07 11:49:22 +00:00
  • 9bca3f73aa telecom.py: Fix calculation of unit ID (this always worked before...?) terasa 2019-10-07 08:55:05 +00:00
  • e0a3c2f08f erena: erenasc variant (Slow Control Adc/Dac) new macros: ONE_ADC_CHIP: reuse IO pins of 2nd ADC NM64_PRIM: drive ADS8688 and LTC2656 on nm64_prim board ADC40MHz: all clocks at half frequency. EPIPE_DEPTH: reduce number of epfifos per channel. ONE_CHANNEL: omit ADC B-channel pipe. stephan 2019-10-05 00:30:31 +00:00
  • af5a120906 hertz/Pt1000: fix gain fomula stephan 2019-10-04 19:20:23 +00:00
  • c4cf54f698 nm64/rsync-cron: check for presence of current hour files stephan 2019-10-04 19:19:02 +00:00
  • 65ccb60c22 hour_rate_pressure: explicitly call MDDM stephan 2019-10-04 19:17:58 +00:00
  • 7f14d2bb79 fp: TRACO drill size stephan 2019-10-04 19:16:53 +00:00
  • ff6b17d420 nm64_prim: fixes V2 TRACO hole size = 1mm ARM reset and USB LED swap fixed +12V to nm64_power polarity fixed stephan 2019-10-01 15:05:26 +00:00
  • 07278a15bc Correct Lunar day xu 2019-09-23 14:34:40 +00:00
  • 4ec09d1639 C'E4 LND: config prior to lunar day 10 change stephan 2019-09-23 13:14:45 +00:00
  • e743df106f C'E4 LND: config for lunar day 10 xu 2019-09-23 13:11:43 +00:00
  • e074f28bc3 C'E4 LND: raise threshold of H2 to 300 keV xu 2019-09-23 13:02:18 +00:00
  • 9eb9a5a154 IMON.awk -v UNIT=TANOS HIST_cadence=60 GPT=1 stephan 2019-09-22 22:14:08 +00:00
  • 0df34c5496 armlib: move generic buffer_out() from udpterm and remove debug code stephan 2019-09-22 19:51:42 +00:00
  • 7943476ec0 TANOS: R=packets/sec over UDP etna 2019-09-22 14:19:35 +00:00
  • 4b09e78a7e TANOS KeepAlive(cmd=) etna 2019-09-22 14:19:03 +00:00
  • c91b78024b udpterm: buffer_out() etna 2019-09-22 14:18:23 +00:00
  • c8e2c48326 TANOS CRONFLY.RC: eth/init when no commands were received for 10 minutes etna 2019-09-22 09:45:04 +00:00
  • f01edd24c7 irena/eth Keep_ALive() etna 2019-09-22 09:42:34 +00:00
  • c7f8c00fd6 TANOS_calib: 2019-09-17-Bi207-1 final stephan 2019-09-19 20:44:41 +00:00
  • 1a84934941 IRENA: add event counts to doHK() stephan 2019-09-19 09:53:38 +00:00