quartus/nmleia.asm.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. quartus/nmleia.asm.rpt:Info: Quartus Prime Assembler was successful. 0 errors, 1 warning quartus/nmleia.fit.rpt: 21. I/O Assignment Warnings quartus/nmleia.fit.rpt:; Force Fitter to Avoid Periphery Placement Warnings ; Off ; Off ; quartus/nmleia.fit.rpt:; I/O Assignment Warnings ; quartus/nmleia.fit.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. quartus/nmleia.fit.rpt:Warning (15564): Compensate clock of PLL "pll192:pll0|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has been set to clock3 quartus/nmleia.fit.rpt:Warning (292013): Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature. quartus/nmleia.fit.rpt:Warning (15714): Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details quartus/nmleia.fit.rpt:Warning (176674): Following 9 pins are differential I/O pins but do not have their complement pins. Hence, the Fitter automatically created the complement pins. quartus/nmleia.fit.rpt: Warning (176118): Pin "clk_T1" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "clk_T1(n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "spi_miso" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "spi_miso(n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "trigger" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "trigger(n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "ARx[3]" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "ARx[3](n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "ARx[2]" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "ARx[2](n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "ARx[1]" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "ARx[1](n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "spi_sck" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "spi_sck(n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "clk_12" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "clk_12(n)" quartus/nmleia.fit.rpt: Warning (176118): Pin "spi_mosi" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "spi_mosi(n)" quartus/nmleia.fit.rpt:Warning (176250): Ignoring invalid fast I/O register assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information. quartus/nmleia.fit.rpt:Warning (176251): Ignoring some wildcard destinations of fast I/O register assignments quartus/nmleia.fit.rpt:Warning (171167): Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information. quartus/nmleia.fit.rpt:Warning (169064): Following 4 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results quartus/nmleia.fit.rpt:Info: Quartus Prime Fitter was successful. 0 errors, 18 warnings quartus/nmleia.map.rpt:; collision ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; bus_active ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; its_me ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; sdone ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; svalid ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; scollision ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; saddr ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; sread ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; start_bit ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; stop_bit ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; qs ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; xx_e ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; hi_e ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; slice ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; fpush ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; fdata ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; ctick ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:; fifo_empty ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ; quartus/nmleia.map.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. quartus/nmleia.map.rpt:Warning (10335): Unrecognized synthesis attribute "synthesis" at ../../altera/adc128s102.v(…) quartus/nmleia.map.rpt:Warning (10335): Unrecognized synthesis attribute "synthesis" at ../../altera/adc128s102.v(…) quartus/nmleia.map.rpt:Warning (10335): Unrecognized synthesis attribute "synthesis" at ../../altera/adc128s102.v(…) quartus/nmleia.map.rpt:Warning (10335): Unrecognized synthesis attribute "synthesis" at ../../altera/adc128s102.v(…) quartus/nmleia.map.rpt:Warning (10335): Unrecognized synthesis attribute "synthesis" at ../../altera/adc128s102.v(…) quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at nmahepam.v(…): object "pll_clock" assigned a value but never read quartus/nmleia.map.rpt:Warning (10034): Output port "STx" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "ADC_nRES" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "ADC_SDI" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "ADC_SCK" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "ADC_nCE" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "DAC_SDI" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "DAC_SCK" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "DAC_nCS" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "THR_SDI" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "THR_SCK" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10034): Output port "THR_nCS" at nmahepam.v(…) has no driver quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at stis_ana_core.v(…): object "incr_base" assigned a value but never read quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at stis_ana_core.v(…): object "mem_reset" assigned a value but never read quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at stis_ana_core.v(…): object "rb_reset" assigned a value but never read quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at stis_ana_core.v(…): truncated value with size 16 to match size of target (4) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at stis_ana_core.v(…): truncated value with size 16 to match size of target (4) quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at dorn.v(…): object "dtrig_en" assigned a value but never read quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at dorn.v(…): object "atrig_en" assigned a value but never read quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at dorn.v(…): object "sa_triggers" assigned a value but never read quartus/nmleia.map.rpt:Warning (10036): Verilog HDL or VHDL warning at dorn.v(…): object "adc_valid" assigned a value but never read quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 4 to match size of target (3) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 9 to match size of target (8) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 10 to match size of target (9) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 13 to match size of target (12) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 48 to match size of target (24) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 96 to match size of target (24) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 192 to match size of target (24) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 384 to match size of target (24) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at dorn.v(…): truncated value with size 768 to match size of target (24) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at divider.v(…): truncated value with size 40 to match size of target (39) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at divider.v(…): truncated value with size 40 to match size of target (39) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at divider.v(…): truncated value with size 40 to match size of target (39) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at divider.v(…): truncated value with size 17 to match size of target (16) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at stis_ana_core.v(…): truncated value with size 16 to match size of target (10) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at itof.v(…): truncated value with size 30 to match size of target (12) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at i2c.v(…): truncated value with size 4 to match size of target (3) quartus/nmleia.map.rpt:Warning (10230): Verilog HDL assignment warning at i2c.v(…): truncated value with size 4 to match size of target (3) quartus/nmleia.map.rpt:Warning (12241): 6 hierarchies have connectivity warnings - see the Connectivity Checks report folder quartus/nmleia.map.rpt:Warning (13039): The following bidirectional pins have no drivers quartus/nmleia.map.rpt: Warning (13040): bidirectional pin "ATx[2]" has no driver quartus/nmleia.map.rpt: Warning (13040): bidirectional pin "ATx[1]" has no driver quartus/nmleia.map.rpt: Warning (13040): bidirectional pin "AIO[6]" has no driver quartus/nmleia.map.rpt: Warning (13040): bidirectional pin "AIO[5]" has no driver quartus/nmleia.map.rpt:Warning (13024): Output pins are stuck at VCC or GND quartus/nmleia.map.rpt: Warning (13410): Pin "STx[4]" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "STx[3]" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "STx[2]" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "STx[1]" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "ADC_nRES" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "ADC_SDI" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "ADC_SCK" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "ADC_nCE" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "DAC_SDI" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "DAC_SCK" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "DAC_nCS" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "THR_SDI" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "THR_SCK" is stuck at GND quartus/nmleia.map.rpt: Warning (13410): Pin "THR_nCS" is stuck at GND quartus/nmleia.map.rpt:Warning (15897): PLL "pll192:pll0|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has parameter compensate_clock set to clock0 but port CLK[0] is not connected quartus/nmleia.map.rpt:Warning (15899): PLL "pll192:pll0|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has parameters clk0_multiply_by and clk0_divide_by specified but port CLK[0] is not connected quartus/nmleia.map.rpt:Warning (21074): Design contains 22 input pin(s) that do not drive logic quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "clk_T1" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "trigger" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "SRx[4]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "SRx[3]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "SRx[2]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "SRx[1]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "ARx[3]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "ARx[2]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "ARx[1]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "ADC_SDO" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[0]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[1]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[2]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[3]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[4]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[5]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[6]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[7]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[8]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[9]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[10]" quartus/nmleia.map.rpt: Warning (15610): No output dependent on input pin "UNUSED[11]" quartus/nmleia.map.rpt:Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 229 warnings quartus/nmleia.sta.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. quartus/nmleia.sta.rpt:Info: Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning