96 lines
11 KiB
Text
96 lines
11 KiB
Text
|
quartus/thhor_crs.asm.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||
|
|
quartus/thhor_crs.asm.rpt:Info: Quartus Prime Assembler was successful. 0 errors, 1 warning
|
||
|
|
quartus/thhor_crs.fit.rpt: 21. I/O Assignment Warnings
|
||
|
|
quartus/thhor_crs.fit.rpt:; Force Fitter to Avoid Periphery Placement Warnings ; Off ; Off ;
|
||
|
|
quartus/thhor_crs.fit.rpt:; I/O Assignment Warnings ;
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (15564): Compensate clock of PLL "pll192:pll|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has been set to clock3
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (292013): Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (15714): Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (176674): Following 4 pins are differential I/O pins but do not have their complement pins. Hence, the Fitter automatically created the complement pins.
|
||
|
|
quartus/thhor_crs.fit.rpt: Warning (176118): Pin "S_OUT" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "S_OUT(n)"
|
||
|
|
quartus/thhor_crs.fit.rpt: Warning (176118): Pin "D_OUT" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "D_OUT(n)"
|
||
|
|
quartus/thhor_crs.fit.rpt: Warning (176118): Pin "S_IN" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "S_IN(n)"
|
||
|
|
quartus/thhor_crs.fit.rpt: Warning (176118): Pin "D_IN" is a differential I/O pin but does not have its complement pin. Hence, fitter automatically created the complement pin "D_IN(n)"
|
||
|
|
quartus/thhor_crs.fit.rpt:Critical Warning (169085): No exact pin location assignment(s) for 1 pins of 56 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (176225): Can't pack node r to I/O pin
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (176250): Ignoring invalid fast I/O register assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (171167): Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (169177): 15 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing Cyclone 10 LP Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (169203): PCI-clamp diode is not supported in this mode. The following 1 pins must meet the Intel FPGA requirements for 3.3V, 3.0V, and 2.5V interfaces if they are connected to devices other than the supported configuration devices. In these cases, Intel recommends termination method as specified in the Application Note 447.
|
||
|
|
quartus/thhor_crs.fit.rpt:Warning (169064): Following 27 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results
|
||
|
|
quartus/thhor_crs.fit.rpt:Info: Quartus Prime Fitter was successful. 0 errors, 16 warnings
|
||
|
|
quartus/thhor_crs.map.rpt:; c0 ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ;
|
||
|
|
quartus/thhor_crs.map.rpt:; c1 ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ;
|
||
|
|
quartus/thhor_crs.map.rpt:; c2 ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ;
|
||
|
|
quartus/thhor_crs.map.rpt:; c4 ; Output ; Warning ; Declared by entity but not connected by instance. Logic that only feeds a dangling port will be removed. ;
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "ADC_nCS" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "ADC_SCK" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "ADC_DIN" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "pt_MCLK" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "pt_SCLK" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "pt_Din" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "S_OUT" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (10034): Output port "D_OUT" at thhor_crs.v(…) has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (12241): 1 hierarchies have connectivity warnings - see the Connectivity Checks report folder
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (13039): The following bidirectional pins have no drivers
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[0]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[1]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[2]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[3]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[4]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[5]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[6]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[7]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[8]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[9]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[10]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[11]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[12]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[13]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[14]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[15]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[16]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[17]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P25[18]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[0]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[1]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[2]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[3]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[4]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[5]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[6]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13040): bidirectional pin "P33[7]" has no driver
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (13024): Output pins are stuck at VCC or GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "pt_MCLK" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "pt_SCLK" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "pt_Din" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_nCS[0]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_nCS[1]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_nCS[2]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_nCS[3]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_SCK[0]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_SCK[1]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_SCK[2]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_SCK[3]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_DIN[0]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_DIN[1]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_DIN[2]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "ADC_DIN[3]" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "S_OUT" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (13410): Pin "D_OUT" is stuck at GND
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (15897): PLL "pll192:pll|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has parameter compensate_clock set to clock0 but port CLK[0] is not connected
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (15899): PLL "pll192:pll|altpll:altpll_component|pll192_altpll:auto_generated|pll1" has parameters clk0_multiply_by and clk0_divide_by specified but port CLK[0] is not connected
|
||
|
|
quartus/thhor_crs.map.rpt:Warning (21074): Design contains 8 input pin(s) that do not drive logic
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "spi_sck"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "pt_Dout"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "ADC_DOUT[0]"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "ADC_DOUT[1]"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "ADC_DOUT[2]"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "ADC_DOUT[3]"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "S_IN"
|
||
|
|
quartus/thhor_crs.map.rpt: Warning (15610): No output dependent on input pin "D_IN"
|
||
|
|
quartus/thhor_crs.map.rpt:Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 67 warnings
|
||
|
|
quartus/thhor_crs.sta.rpt:Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||
|
|
quartus/thhor_crs.sta.rpt:Info: Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning
|