thhor_crs/README.md
Stephan I. Böttcher 50debb9106 preamp board image
2026-05-04 23:20:17 +02:00

37 lines
1.1 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# THHΘR Cosmic Ray Sensor
## Sensor
CHAOS Jr: HET BGO and 2× HETB.
- BGO: 2 photodiodes × 2 gains = 4 channels
- HETB: 2 detector × 2 segments × 2 gains = 8 channels
## Electronics
- single 5…20V power supply
- 37 pin Omnetics Bilobe connector to the preamps board, A28200-037
- detector bias voltage, positive or negative
- 12 channel DORN readout, dual gain (with six preamps)
- with Beau-SK type preamps
- 10LC25 FPGA
- ATtiny824-XF
- AT45B161E for FPGA bitfile and data
- 3.3V UART (optional RS485 half duplex) ifc to OBC
- optional HSS serial ifc/spacewire.
- optional MS5534 pressure sensor for balloon missions
![Layout](thhor_crs-topbot.png)
### Transformer
- 4 turns, thick, Vcore, 1.25V, directly regulated.
- 12 turns, thick, primary.
- 12 turns, medium, SEPIC, 4.5V digital, LDO regulators Vpll=2.5V, Vio=3.3V, Vadc=3.3V.
- 19 turns, medium, +7.5V, LDO regulators +5V shaper, preamps, fets.
- 19 turns, medium, -7.5V, LDO regulators -5V shaper, preamps.
- 19 turns, thin, Vbias cascade.
![Transformer](IMG_20260324_100529_131-1200.jpg)
## Charge Sensitive Amplifier
![Layout](thhor_csa-topbot.png)